Cost Saver Steel Galvanised
Tray Body
High Strength – Low Cost Tray Design
- High Tensile galvanised sheet material being used for complete tray.
- Retaining the 76mm diameter heavy duty headboard pipe.
- Retaining all the heavy-duty hardware, mounting system and the full length rope-rails.
- Retaining the strong, recessed rear-coaming to mount the rear combination lights and numberplate.
- Retaining the recessed load lashing rings in the checker-plate floor.
- Unrestricted load area over checker-plate floor.
Advanced computer modelling and testing
We have developed our products with our harsh Australian environment in mind and for that reason have applied far greater test-loads than expected in real-world driving conditions. This identifies high stress points enabling us to optimise our design and remove risk areas
Our tray will not let you down in the field
Heavy Duty Hardware
We use the same heavy duty hardware across the full range of our trays. Our hardware include hinges with nylon bushes, forged gudgens and spring loaded over-centre latches are used to eliminate tray rattle.
LED Number Plate Lights
We use Quality Narva LED number plate Lights. The LED comes with a 5 year warranty
Load Restraints
Our Heavy Duty Steel Tray range is produced with 1800Kg safety rated lashing rings as standard
Narva Bulb Style Tail Lights
As standard to all our Cost Saver Steel Trays we include a quality set of Narva conventional bulb style rear combination lights
Rear Coaming Stone Guard
Integrated into our design, our rear coaming allows for the mounting of the rear combination and number plate lights which also acts as a stone guard, to protect the lights from damage.
Australian Made
We are an Australian Owned company. We source our raw materials from Australia to provide you with a True Australian Made Product.
Optional Extras
Safety Screen
Our Safety Screens have been tested to the Australian Standard for cargo barriers AS/NZS 4034.1. This screen also complies with strict mining guide lines for occupant safety.
Finish options are either Powder Coated or Galvanised
Removable Rear Rack
Powder coated or Hot-Dip Galvanised Finish
Under Tray Draw
Our Integrated Under tray draw tucks in nicely with a flush fitting facia plate. This under tray draw can carry up to 100Kg.
Narva LED Rear Combination Tail Lights
These lights come with a 5 year LED warranty
Tray Facts Dual Cab Single Cab
Weight: (Dependent on Finish) 240 – 260KG 325KG
Standard External Size: L1800 x W 1875 L2490 x W 1875
Standard Internal Size: L1720 x W1800 L2370 x W1800
Tray Body Material: Mild Steel
Main Runner & Mount: Mild Steel
Construction: Checker Plate Floor on Bolted Sub Frame
Hardware: Heavy Duty Hardware
Headboard Type: 76mm Mild Steel Headboard Tube
